Sirui ET-1004 Easy Traveler Aluminium Tripod with E-10 Ball Head

Sirui A-1005 Aluminium Tripod with Y-10 Ball Head

The A1005 Aluminum Tripod with Y-10 Ball Head from Sirui is a 5-section tripod that weighs 2.1kg. The aluminum legs fold a full 180° in reverse to make it a compact 35.56cm. With the center column fully extended, the tripod can reach a maximum working height of 139.95cm. Additionally, with a load capacity of 9.9kg, this tripod is suitable for a pro DSLR with a large telephoto lens.

The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 25.9cm, and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

The 1.2kg tripod has a maximum height of 139.95cm, a minimum height of 25.9cm, and a load capacity of 9.9kg
The aluminum legs have 5-sections and the legs fold in reverse to a compact 35.56cm
Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera

• The 1.2kg tripod - Maximum height of 139.95cm, a minimum height of 25.9cm. 
• Aluminium legs have 5-sections - Legs fold in reverse to a compact 35.56cm. 
• Hook located on the centre column - Weight and stability can be increased by adding a small sand bag or camera bag . 
• Three legs taking up to much room - Detachable leg converts into a monopod. 
• The Y-10 Ball Head - Pans and tilts in a single movement to position the camera to a 90 degree angle. 
• Load capacity - 9.9kg.