Nikon Z6 III Camera with Z 24-70mm f/2.8 S II Lens Kit

Nikon Z6 III Camera with Z 24-70mm f/2.8 S II Lens Kit Summary

The Nikon Z6 III with Z 24-70mm f/2.8 S II Lens combines a hybrid full-frame mirrorless camera with Nikon’s updated 24-70mm standard zoom from the S-Line range. The Z6 III is at the centre of Nikon’s mirrorless camera lineup, with a 24.5 megapixel partially stacked CMOS sensor and the EXPEED 7 processor that support fast autofocus, high-speed continuous shooting and advanced video recording, including 6K and oversampled 4K capture.

Included in the Nikon lens kit is the Z 24-70mm f/2.8 S II zoom which spans a versatile focal range suitable for landscape, portrait, documentary, events and video content creation. Its constant f/2.8 aperture, revised optical design and improved close focusing performance make it a core lens for photographers and filmmakers who want consistent output across a wide range of subjects.

This Nikon lens kit supports high-end stills and video workflows where versatility, speed and consistent image quality are required from a full-frame hybrid camera and professional lens combination.

Nikon Z6 III Key Features

• 24.5 megapixel full-frame partially stacked CMOS sensor with faster readout
• EXPEED 7 processor for rapid autofocus calculations and subject detection AF
• Burst capture up to 120 frames per second
• In-body 5-axis image stabilisation rated up to 8 stops
• Hybrid autofocus with advanced 3D tracking and multiple subject detection types
• Internal 6K RAW, 5.4K/60p and 4K/60p video recording
• Bright high-resolution EVF with expanded colour gamut and a 3.2-inch vari-angle touchscreen

Menus and controls respond quickly with minimal lag, and the vari-angle screen plus joystick-based focus control allow fast reframing when switching between stills and video capture.

Nikon Z 24-70mm f/2.8 S II Lens Key Features

• 24-70mm standard zoom range for general-purpose shooting
• Constant f/2.8 aperture across the zoom range
• Nikon’s first revised mirrorless lens optical design for even better performance
• Premium coatings including Arneo and Meso-amorphous, Fluorine
• Dual STM motors for fast and quiet autofocus
• Weather-sealed construction with updated internal design

Nikon Z6 III Camera with Z 24-70mm f/2.8 S II Lens Kit in More Detail

Partially stacked sensor

The Z6 III uses a 24.5 megapixel partially stacked CMOS sensor paired with the EXPEED 7 processor. Faster sensor readout improves responsiveness during continuous shooting, autofocus tracking and viewfinder performance. Nikon maintains a 60fps EVF refresh rate during 20fps burst shooting, allowing uninterrupted subject tracking during fast-moving sequences.

Viewfinder and screen

The electronic viewfinder is a 5,760k-dot panel with up to 4000 nits brightness and DCI-P3 colour support. This provides a bright, high-contrast live view in outdoor conditions and improves colour judgement during on-location review. The 2,100k-dot vari-angle rear screen supports both horizontal and vertical shooting, which is useful when alternating between stills and video work.

Autofocus tracking with subject detection

Autofocus behaviour is derived from Nikon’s higher-end Z bodies, using 3D tracking and subject detection for people, animals, vehicles and aircraft. Eye detection remains active even when subjects occupy a small portion of the frame, which is useful when working across the mid-range focal lengths of the 24-70mm zoom.

Burst capture and pre-release shooting

The Z6 III supports burst shooting up to 120fps with AF and AE using specific capture modes, including 10MP DX-format JPEGs at 120fps and 24MP full-frame JPEGs at 60fps. Pre-release capture records frames before the shutter is fully pressed, helping retain moments where timing is difficult to predict.

Video recording formats

Internal video recording includes 6K/60p RAW, 5.4K/60p (YUV) and oversampled 4K UHD up to 60p. Codec support includes N-RAW, ProRes RAW HQ, ProRes 422 HQ, H.265 and H.264, with 12-bit RAW and 10-bit log options available. Audio support includes line-level input via the microphone port and timecode synchronisation for multi-camera setups.

Stabilisation and focus point VR

The camera features 5-axis in-body stabilisation rated up to 8 stops, with electronic VR available for video. Focus point VR prioritises stabilisation around the active focus area rather than distributing correction evenly across the frame, which is useful when subjects are positioned away from centre at mid-range focal lengths.

Optical design and Z 24-70mm f/2.8 S II handling

The Z 24-70mm f/2.8 S II uses a revised optical formula compared to the original version, with improved close focusing and refined edge performance. Dual STM motors drive autofocus, supporting quiet operation for video and consistent tracking during continuous shooting.

The lens supports a 82mm front filter thread, allowing standard use of ND and polarising filters without adapters. The 11-blade rounded aperture, and premium lens coatings such as Arneo and Meso-amorphous Coatings, as well as Fluorine, all contribute to the extremely refined image quality.

Size, weight and ergonomics

The Z 24-70mm f/2.8 S II weighs 705g. Mounted on the Z6 III body, it forms a balanced setup suitable for long sessions, with weather sealing across both camera and lens for operation down to -10°C.

Frequently asked questions

What memory card slots are available?

Dual card slots are included, with one CFexpress Type B slot that also supports XQD cards, and one UHS-II SD card slot.

What are the benefits of a partially stacked sensor?

A partially stacked sensor allows faster readout than a conventional CMOS design, which helps reduce rolling shutter and supports higher burst rates, improved autofocus tracking and more responsive viewfinder performance.

What burst shooting speeds are available?

Up to 120fps is available for 10MP DX-format JPEGs and up to 60fps for 24MP full-frame JPEGs, with AF, AE and pre-release capture support.

What video formats can be recorded internally?

Internal recording supports N-RAW, ProRes RAW HQ, ProRes 422 HQ, H.265 (HEVC) and H.264 (AVC), with 6K, 5.4K and 4K options depending on format and frame rate.

Does the camera include in-body image stabilisation?

Yes. Five-axis in-body image stabilisation is included, rated up to 8 stops, with electronic VR available for video recording.

What is the minimum focusing distance of the Z 24-70mm f/2.8 S II lens?

Minimum focusing distance is 0.38m across the zoom range.

Does the Z 24-70mm f/2.8 S II support standard front filters?

Yes. The lens uses an 82mm front filter thread for screw-in filters.

Is timecode supported for video?

Yes. Timecode synchronisation is supported for multi-camera and professional video setups.

What’s in the box

• Nikon Z6 III Mirrorless Camera Body
• EN-EL15c Rechargeable Battery
• DK-29 Rubber Eyecup
• BS-1 Accessory Shoe Cover
• AN-DC26 Strap
• USB Cable
• Body and lens caps
• Nikon Z 24-70mm f/2.8 S II Lens
• Lens Hood HB-117
• Lens Cap LC-77B
• Rear Cap LF-N1
• Lens Case CL-C2

Specifications